×

Warning

Failed deleting thumb_156_101.jpg
Failed deleting thumb_156_20.png
Failed deleting thumb_156_23.png
Failed deleting thumb_156_28.png
Failed deleting thumb_156_31.png
Failed deleting thumb_156_42.png
Failed deleting thumb_156_45.png
Failed deleting thumb_156_55.png
Failed deleting thumb_156_59.png
Failed deleting thumb_156_63.jpg
Failed deleting thumb_156_67.jpg
Failed deleting thumb_156_70.gif
Failed deleting thumb_156_71.png
Failed deleting thumb_156_8.png
Failed deleting thumb_156_87.jpg
Failed deleting thumb_156_90.jpg
Failed deleting thumb_156_94.png
Failed deleting thumb_156_98.png

How you can turn on debug messages on Qsys

If you have already created a qsys file, just follow the next steps

  • Close the <>.qsys file you are working with.
  • Open the file called <preferences.xml>, which is in the folder where your <>.qsys file is.
  • Look for a line with 
  • Replace the line with 
  • Reopen the <>.qsys file you are working with, and you must see on the loading console some new messages which look like these (green bugs):
 
Welcome to FPGA lover!!!
 
I invite you to take a look at the new manuals on the web page, and have a tour, Enjoy, and Love FPGAs and Embedded Systems!
 
Cheers!